Description of the INI File Values

[Startup]

BrowserPlugin: This key is only used in IceViewer version 13.00 and older.

To set the file formats the Browser Plug-in is registered to when installing IceViewer using the MSI installer, use the “PLUGIN” MSI parameter. For more information, please see the MSI documentation.

The BrowserPlugin key sets the file formats the Browser Plug-in is registered to when the Administrator clicks “Enable” in the IceViewer main menu > Browser Plugin Switch. If the plug-in is already enabled, the Administrator has to click “Disable” then “Enable” for the changes to take effect:

Possible values:

0: IceViewer was installed with the PLUGIN=0 option. This value only indicates that IceViewer was installed with the Browser Plug-in disabled. If the Browser Plugin is enabled on the user interface by the Administrator, it will be associated with both JPEG and TIFF files.

1: The Browser Plug-in is associated with both JPEG and TIFF files

2: The Browser Plug-in is is associated with TIFF files, but not associated with JPEG files; therefore, the IceViewer Browser Plug-in will not be the default viewer to open JPEG files in Internet Explorer.

3: The Browser Plug-in is is associated with JPEG files, but not associated with TIFF files; therefore, the IceViewer Browser Plug-in will not be the default viewer to open Tiff files in Internet Explorer.

[Viewer_Settings]

First Start: IceViewer uses this INI file value internally for displaying the associated file types on the File extension dialog. Do not modify this INI file value.

Display_mode: The IceViewer default view mode. If the "Save View Setting" is enabled, the IceViewer will save the Display_mode configuration in the User IceViewer.ini file on exit. (Please note; each user has his IceViewer.ini file)

1: Single Page View – Continuous scrolling between the pages, with the pages arranged into one column.

2: Multi-Page View – Continuous scrolling between the pages, with multiple pages in a row. The number of pages in a row depends on the sizes of the pages in the document and the IceViewer window size.

4: Actual Size – Displays the current page without any scaling factors, using the actual size of the page (in pixels).

8: Fit to Window – Scales the current page so that the entire page fits into the viewing window.

64: Normal Size – The current page is displayed and scaled to the page’s DPI (Dot Per Inch) resolution.

136: Fit and Center – Scales the current page so that the entire page fits into the viewing window and places it in the center of the window (Default).

192: Center Page – The current page is aligned to the center of the window. The page is displayed and scaled to the page’s DPI (Dot Per Inch) resolution.

4096: Fit To Width – Scales the current page to fit to the width of the viewing screen.

Selection_Mode: Selects the default tool that is activated when IceViewer starts up.

The following values are available:

1: Zoom mode - Enables “Zoom Mode” when IceViewer starts up. When Zoom Mode is active, clicking on the page zooms in on the document.

2: Panning - Enables the “Hand Tool” when IceViewers starts up. The Hand Tool allows the user to scroll in the document by clicking on the page and dragging the mouse in any direction.

3: Annotation select (Default) - Enables the “Select” tool when IceViewer starts up. When the “Select” tool is activated, one can use the mouse to select an area on the page for copying, select existing annotations (text, stamp, etc.), or place new annotations on the page. For more information about annotations, refer to the Annotation section.

Auto_Rotate_Mode: Controls the Auto Rotation configuration of IceViewer. The possible values are the followings:

0: Disable Auto Rotation (Default)

1: Rotate Landscape to Portrait clockwise

2: Rotate Landscape to Portrait counter-clockwise

3: Rotate Portrait to Landscape clockwise

4: Rotate Portrait to Landscape counter-clockwise

OpenDialogDefaultPathIsDocuments: When a user opens a file for the first time using the open file dialog, if this key is set to "1," the dialog

forces its default path to the user's Documents folder. After a file is opened successfully, IceViewer will automatically set this key to "0."

0: IceViewer will use the last opened or saved document's path.

1: IceViewer will use the user's Documents folder (default).

[UI_Settings]

Theme: Specifies the general theme for the IceViewer user interface.

0: Use the modern white Office theme. (Default)

1: Use the classic blue Office theme.

Ribbon_Layout: Specifies the selected Ribbon layout.

0: Use classic ribbon. (Default)

1: Use simplified ribbon.

Custom_Ribbon: Specifies the file path of an exported Ribbon layout. That will be imported at the first launch of IceViewer.

Custom_QAT: Specifies the file path of an exported Quick Access Toolbar. That will be imported at the first launch of IceViewer.

[FileAssociation]

The File Association is used if the “File Extension Dialog” is set to 2. For example: File Extensions Dialog=2

If the file type value is 0. IceViewer will not be associated with the file type. For example: pdf=0.

If the file type value is 1. The IceViewer resets the file associations for the file type, and the User could associate the IceViewer with the file type. For example: pdf=1.

Windows will display the “How do you want to open this file?” with IceViewer in the list of files that can open the file type.

The user has a chance of selecting IceViewer as the default viewer for the file type.

tif: Controls the .TIF and .TIFF file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .TIF and .TIFF files.

1: IceViewer will be the default viewer for TIF and TIFF files (Default).

fax: Controls the .FAX file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .FAX file.

1: IceViewer will be the default viewer for .FAX file (Default).

jpg: Controls the .JPG and .JPEG file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .JPG and .JPEG files (Default).

1: IceViewer will be the default viewer for .JPG and .JPEG files.

bmp: Controls the .BMP file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .BMP file.

1: IceViewer will be the default viewer for .BMP file (Default).

png: Controls the .PNG file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .PNG file (Default).

1: IceViewer will be the default viewer for .PNG file.

cal: Controls the .CAL file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .CAL file.

1: IceViewer will be the default viewer for .CAL file (Default).

txt: Controls the .TXT file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .TXT file (Default).

1: IceViewer will be the default viewer for .TXT file.

pdf: Controls the .PDF file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .PDF file (Default).

1: IceViewer will be the default viewer for .PDF file.

ica: Controls the .ICA file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .ICA file (Default).

1: IceViewer will be the default viewer for .ICA file.

mca: Controls the .MCA file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .MCA file (Default).

1: IceViewer will be the default viewer for .MCA file.

afp: Controls the .AFP file association of the IceViewer. The possible values are the followings:

0: IceViewer will not be associated with .AFP file (Default).

1: IceViewer will be the default viewer for .AFP file.

[General_Settings]

Force Default Settings: When enabled, IceViewer will ignore the settings in the user’s INI file, and will only use the settings in the default IceViewer INI file located in the IceViewer installation directory.

0: Use the settings from the user-specific INI file first. If the setting is not in the user-specific INI file, use the value from the default INI file. (Default)

1: Ignore the user-specific INI file, only use the default INI file.

Open_In_New_Window: Controls how IceViewer opens documents if there is already a document opened in the current window.

0: Always open documents in the current window, closing the old document.

1: Open the document in a new window. (Default)

File Extensions Dialog: Controls the file type association window

0: Dialog does not appear, and no association is made in the background (the file association is not affected)

1: Dialog appears at startup to select the file association (Default)

2: Dialog does not appear, and file type association will be implemented automatically the first time the IceViewer is started, according to settings in the FileAssociation section in the INI file. In case of MSI Installation, the file type association for the user will be implemented during the installation.

Getting started: Controls the getting started dialog

0: Getting started dialog does not appear.

1: Getting started dialog appears during startup. (Default)

Check_Default_Tiff_Application: When enabled, IceViewer will check if it is the default TIFF application when a TIFF file is opened. If IceViewer is not the default, then the user will be asked to change the default TIFF application to IceViewer. (only once for every IceViewer window)

0: IceViewer does not show a message if it is not the default TIFF application.

1: IceViewer shows a message if it is not the default TIFF application. (Default)

Check_Default_PDF_Application: When enabled, IceViewer will check if it is the default PDF application when a PDF file is opened. If IceViewer is not the default, then the user will be asked to change the default PDF application to IceViewer. (only once for every IceViewer window)

0: IceViewer does not show a message if it is not the default PDF application.

1: IceViewer shows a message if it is not the default PDF application. (Default)

Thumbnail_View: Enable the Thumbnail View for multi-page documents.

1: Enable the Thumbnail View for multi-page documents. (Default)

0: Disable this function.

Save View Setting: Enable Save View Setting feature. Selects the Save current view upon exit option in the IceViewer Options > View. If Save View Setting is enabled, it overwrites the Display_mode configuration.

0: Disable the Save View Setting feature.

1: Enable the Save View Setting feature.

AutoSave: Enable Auto Save feature.

0: Disable Auto Save feature. (Default)

1: Enable Auto Save feature.

Show_Annotation_Color_Lost: Configures the action for Annotation burn in on monochrome images.

0: Always ask. (Default)

1: Convert image to color.

2: Convert annotation to monochrome.

Enable_File_Navigation: Enable File Navigation feature. This feature enables IceViewer to navigate and open files from the directory in which the currently opened document is placed.

0: Disable File Navigation feature.

1: Enable File Navigation feature. (Default)

Enable_Thumbnail_Browser: Enable Thumbnail Browser feature

0: Disable the Thumbnail Browser feature.

1: Enable the Thumbnail Browser feature. (Default)

Mono_Conversion_Method: Specifies the dithering method of monochrome (black and white) documents. For more information about the conversion (dithering) methods, refer to the General Options section.

0: Floyd-Steinberg (Default)

1: Jarvis-Judice-Ninke

2: Smooth

3: Sharp

4: Stucki

5: Burkes

6: Sierra

7: Stevenson-Arce

Enable_Send_In_Email: Enable Send documents in Email feature.

0: Disable Send documents in Email feature.

1: Enable Send documents in Email feature. (Default)

Enable_Upload_To_SharePoint: Enable Upload documents to SharePoint feature.

0: Disable Upload documents to SharePoint feature.

1: Enable Upload documents to SharePoint feature. (Default)

Enable_OCR: Enable OCR (Optical Character Recognition feature) and Search.

0: Disable OCR and Search.

1: Enable OCR and Search. (Default)

Enable_Search: Enables or disables the “OCR & Search” feature. “OCR & Search” can be enabled or disabled separately even if OCR is disabled with the “Enable_OCR” key. Available values:

0: Disable the “OCR & Search” feature.

1: Enable the “OCR & Search” feature. (Default)

Enable_Text_Search: Enables or disables Text Search in PDF documents. Available values:

0: Disable Text Search.

1: Enable Text Search. (Default)

Enable_Printing: Enable Printing in IceViewer.

0: Disable Printing.

1: Enable Printing. (Default)

Enable_Scan: Enable Scanning in IceViewer.

0: Disable Scanning.

1: Enable Scanning. (Default)

Enable_Edit_Text_Mode: Enable text editing for PDF documents.

0: Disable PDF text editing.

1: Enable PDF text editing. (Default)

Enable_Backstage_Combine_Files: Enable the Combine files feature.

0: Disables file combining. The Combine files button will be grayed out in the backstage.

1: Enable Combine files in the backstage.

Enable_Cut: Enable the Cut functionality from the Clipboard group on the Home tab. Disabling this option also disables the ability to copy pages using keyboard shortcuts. Cutting annotations are not affected by this option.

0: Disable Cut functionality for pages.

1: Enable Cut functionality for pages. (Default)

Enable_Copy: Enable the Copy functionality from the Clipboard group on the Home tab. Disabling this option also disables the ability to cut pages using keyboard shortcuts. Copying annotations are not affected by this option.

0: Disable Copy functionality for pages.

1: Enable Copy functionality for pages. (Default)

Enable_Paste: Enable the Paste functionality from the Clipboard group on the Home tab. Disabling this option also disables the ability to paste pages using keyboard shortcuts. Pasting annotations are not affected by this option.

0: Disable Paste functionality for pages.

1: Enable Paste functionality for pages. (Default)

Enable_Burning_Annotations: Enable or disable burn-in of annotations. IceViewer will only ask to burn-in the redactions that the user placed if this option is enabled. Otherwise, if the option is disabled, it is recommended to also disable the Redact feature. One may disable the Redact feature by setting the option ‘Enable_Redact’ to 0 in the IceViewer.ini file inside the installation directory.

0: Disable the Burn-in feature.

1: Enable the Burn-in feature. (Default)

Enable_Loading_Annotations_Manually: Enable or disable manually loading annotations. Enables or disables the following items on the IceViewer user interface:

• Load feature on the Annotation tab
• Load Annotation(s) and Add Annotation(s) from File items in the right-click context menus

0: Disable manually loading annotations.

1: Enable manually loading annotations. (Default)

Enable_Saving_Annotations_Manually: Enable or disable manually saving annotations. When this option is enabled, the Save feature on the Annotation tab and the Save Selected Annotation(s) item in the right click context menus are enabled.

0: Disable manually saving annotations.

1: Enable manually saving annotations. (Default)

Enable_Annotation_Layers: Enable or disable the Layers feature on the Annotation tab.

0: Disable the Layers feature.

1: Enable the Layers feature. (Default)

Enable_Page_Move: Enable the Move page feature from the Page operations group on the Tools tab. Disabling this option also disables the ability to move pages via dragging and dropping.

0: Disable the Move page feature.

1: Enable the Move page feature. (Default)

Enable_Page_Cut: Enable the Cut page feature from the Page operations group on the Tools tab.

0: Disable the Cut page feature.

1: Enable the Cut page feature. (Default)

Enable_Page_Insert: Enable the Insert page feature from the Page operations group on the Tools tab.

0: Disable the Insert page feature.

1: Enable the Insert page feature. (Default)

Enable_Page_Merge_Text_With_Image: Enable the Merge text with image feature from the Page operations group on the Tools tab.

0: Disable the Merge text with image feature.

1: Enable the Merge text with image feature. (Default)

Enable_File_Split: Enable the Split file feature from the File operations group on the Tools tab.

0: Disable the Split file feature.

1: Enable the Split file feature. (Default)

Enable_File_Cut: Enable the Cut file feature from the File operations group on the Tools tab.

0: Disable the Cut file feature.

1: Enable the Cut file feature. (Default)

Enable_File_Delete: Enable the Delete file feature from the File operations group on the Tools tab.

0: Disable the Delete file feature.

1: Enable the Delete file feature. (Default)

Enable_Color_Mode_Color: Enable changing the color mode of pages to Color using the buttons in the Color mode group on the Tools tab.

0: Disable the ability to change the color mode to Color.

1: Enable the ability to change the color mode to Color. (Default)

Enable_Color_Mode_Gray: Enable changing the color mode of pages to Grayscale using the buttons in the Color mode group on the Tools tab.

0: Disable the ability to change the color mode to Grayscale.

1: Enable the ability to change the color mode to Grayscale. (Default)

Enable_Color_Mode_Mono: Enable changing the color mode of pages to Monochrome using the buttons in the Color mode group on the Tools tab.

0: Disable the ability to change the color mode to Monochrome.

1: Enable the ability to change the color mode to Monochrome. (Default)

Enable_Change_Resolution: Enable changing the resolution of pages through the buttons in the Details group on the Tools tab.

0: Disable changing resolution of pages.

1: Enable changing resolution of pages. (Default)

Keep_Text_As_Annotations_In_Tiff: Enable keeping “Add Text” as annotations when saving TIFF images.

0: Disable keeping “Add Text” as annotations. (Default)

1: Enable keeping “Add Text” as annotations.

Enable_Editing_PDF_Annotations: Enable selection and editing of PDF annotations supported by IceViewer.

0: Disable selection of PDF annotations.

1: Enable selection and editing of PDF annotations. (Default)

Enable_Rotation: Enable the ability to rotate pages.

0: Disable the ability to rotate pages.

1: Enable the ability to rotate pages. (Default)

Enable_Flip: Enable the ability to flip pages using the Flip Vertical and Flip Horizontal buttons on the Tools tab.

0: Disable the ability to flip pages.

1: Enable the ability to flip pages. (Default)

Enable_Invert: Enable the ability to invert pages.

0: Disable the ability to invert pages.

1: Enable the ability to invert pages. (Default)

Enable_Crop: Enable the ability to crop pages.

0: Disable the ability to crop pages.

1: Enable the ability to crop pages. (Default)

Enable_Flatten_PDF_Page: Enable flattening PDF Page(s) feature.

0: Disable the PDF page flattening feature.

1: Enable the PDF page flattening feature. (Default)

Enable_Signature: Enable the Add Signature button on the Home tab.

0: Disable the Add Signature button.

1: Enable the Add Signature button. (Default)

Enable_Text: Enable the Add Text button on the Home tab.

0: Disable the Add Text button.

1: Enable the Add Text button. (Default)

Enable_Cleanup_Clean_Slow: Enable the Clean image feature from the Document Cleanup tab.

0: Disable the Clean image feature.

1: Enable the Clean image feature. (Default)

Enable_Cleanup_Deskew: Enable the Deskew image feature from the Document Cleanup tab.

0: Disable the Deskew image feature.

1: Enable the Deskew image feature. (Default)

Enable_Cleanup_Punch_Hole: Enable the Punch hole removal feature from the Document Cleanup tab.

0: Disable the Punch hole removal feature.

1: Enable the Punch hole removal feature. (Default)

Enable_Cleanup_Black_Border: Enable the Remove black border feature from the Document Cleanup tab.

0: Disable the Remove black border feature.

1: Enable the Remove black border feature. (Default)

Enable_Cleanup_Lines: Enable the Lines removal feature from the Document Cleanup tab.

0: Disable the Line removal feature.

1: Enable the Line removal feature. (Default)

Side_Pane_View: Sets the currently visible right-side panel content.

0: The panel is closed.

1: The panel shows the bookmarks if the PDF document got any at start-up.

Side_Pane_View_Width: Sets the width of the right-side panel if it is visible.

Sidebar_Bookmarks: Enable or disable the Bookmarks Panel in the sidebar and the side toolbar.

0: Disable the panel.

1: Enable the panel. (Default)

Sidebar_Comments: Enable or disable the Comments Panel in the sidebar and the side toolbar.

0: Disable the panel.

1: Enable the panel. (Default)

Web_Links_General_Behavior: Sets the general behavior of a web link if pressed.

0: Individualize web links behavior.

1: Allow all web links.

2: Block all web links.

Default_Behavior_For_Custom_Web_Links: If "Web_Links_General_Behavior" is set to 0 (Individualize web links behavior), any unset links will behave according to this option.

0: Ask the user to decide whether to open or block a web link with unset behavior.

1: Allow all web links that do not have a custom behavior.

2: Block all web links that do not have a custom behavior.

Enable_Internet_Access_Manager: Enable/disable users to modify the Internet Access Manager. If disabled all web links are blocked. Only can be set by Administrator.

0: No

1: Yes

Enable JavaScript: Enable JavaScript in PDF documents for users.

0: Disable JavaScript for users

1: Enable JavaScript for users (Default)

Create_Links_From_URLs: When enabled, IceViewer will automatically detect web links embedded in text and make them clickable.

0: IceViewer will not make web links in text clickable.

1: IceViewer will make web links in text clickable (default).

Display_Embedding_Warning: Determines whether IceViewer should display a warning when a font with restricted embeddability is selected.

0: IceViewer shows a warning dialog when a restricted embeddability font is selected. (Default)

1: IceViewer will not show a warning for restricted embeddability fonts.

The following features can only be enabled through the “IceViewer.ini” INI file placed in the installation directory of the IceViewer:

‘Enable_File_Navigation’, ‘Enable_Thumbnail_Browser’, ‘Enable_Send_In_Email’, ‘Enable_Upload_To_SharePoint’, ‘Enable_OCR’, ‘Enable_Scan’, ‘Enable_Copy’, ‘Enable_Cut’, ‘Enable_Paste’, ‘Enable_Burning_Annotations’, ‘Enable_Loading_Annotations_Manually’, ‘Enable_Saving_Annotations_Manually’, ‘Enable_Annotation_Layers’, ‘Enable_Page_Move’, ‘Enable_Page_Cut’, ‘Enable_Page_Insert’, ‘Enable_Page_Merge_Text_With_Image’, ‘Enable_File_Split’, ‘Enable_File_Cut’, ‘Enable_File_Delete’, ‘Enable_Color_Mode_Color’, ‘Enable_Color_Mode_Gray’, ‘Enable_Color_Mode_Mono’, ‘Enable_Change_Resolution’, ‘Enable_Rotation’, ‘Enable_Flip’, ‘Enable_Invert’, ‘Enable_Crop’, ‘Enable_Signature’, ‘Enable_Cleanup_Clean_Slow’, ‘Enable_Cleanup_Deskew’, ‘Enable_Cleanup_Punch_Hole’, ‘Enable_Cleanup_Black_Border’, ‘Enable_Cleanup_Lines’, ‘Quick_Copy_Page_Limit’, ‘Enable_SharePoint_Upload’, ‘Enable_Send_Email’

By default, the primary INI file is placed in one of the following directories, which can be modified only by the Administrator:

By default, on 64-bit operating systems

For the 64-bit IceViewer:

For the 32-bit IceViewer, and for IceViewer versions below 13.30 (formerly TIFF Viewer):

By default, on 32-bit operating systems

NOTE: To make sure users cannot edit the primary INI file of the IceViewer, the IceViewer has to be installed into the default directory, or make sure the IceViewer is installed into a directory that can be modified only by the Administrator.

Citrix-Disable_Recent_File_List: Disables the Recent File List on IceViewer. This option is enabled automatically if IceViewer detects an installed Citrix XenApp on the system, otherwise it will be disabled. This option improved the stability of IceViewer, since in some cases the recent file list cannot be opened through Citrix XenApp due to security reasons.

0: Enables Recent File List. The recently opened documents will be shown in IceViewer. (Default option on systems without Citrix XenApp)

1: Disables Recent File List. The recently opened documents will not be shown in IceViewer. (Default option on systems with Citrix XenApp)

AutoLoadAnnotationFile: Configures the Enable loading annotation file automatically option in the IceViewer Options > Annotation and Stamp > General.

0: Disables loading annotation file automatically option

1: Enables loading annotation file automatically option (Default)

Enable_Saving: If the "Enable Saving" is unchecked the Save and Save as function are disabled in the IceViewer all users. If the "Enable Saving" is unchecked, IceViewer doesn't ask for saving the modification when closing. The "Enable Saving" can be edited by Administrators.

0: Saving is disabled

1: Saving is enabled (Default)

Enable_Save_Browser: Enables or disables the saving feature in the IceViewer Browser Plug-in.

1: Enable saving in the IceViewer Browser Plug-in. The “Save TIFF File” icon will be active in the browser plug-in. (Default)

0: Disable saving in the IceViewer Browser Plug-in. The “Save TIFF File” icon will be inactive in the browser plug-in.

Disable_Memory_Files: The “Disable_Memory_Files” option configures the IceViewer to load the entire images into the memory before opening to reduce the loading time.

0: Enable loading the entire image into memory before opening a document. This option results faster loading. (Default)

1: Disable loading the entire image into the memory.

BurnAnnotationOnSave: Configures the “Burn annotation into the image when saving the document” option in the IceViewer > Annotation and Stamp > General options. If this option is enabled, IceViewer automatically burns the annotations into the opened file when saving the document.

1: Enable “Burn annotation into the image when saving the document” option

0: Disable “Burn annotation into the image when saving the document” option (default)

BurnAnnotationIntoCopiedImage: Configures the “Copy the image with annotations burned in” option in the IceViewer > Annotation and Stamp > General options. If this option is enabled, IceViewer burns in the annotations to the copied page, so annotations will be visible in applications other than IceViewer. The option only affects pages pasted into other applications. When copy-pasting pages into IceViewer, the annotations remain editable.

1: Enable “Copy the image with annotations burned in” option (default)

0: Disable “Copy the image with annotations burned in” option

Save_Annotations_To_Separate_File: Configures the “Always save annotations into separate file” option in the IceViewer > Annotation and Stamp > General options. If this option is enabled, IceViewer saves the annotations into a .ann file when saving a TIFF document, instead of saving the annotations into the TIFF file.

1: Enable “Always save annotations into separate file” option

0: Disable “Always save annotations into separate file” option (default)

Restrict_Saving: When this option is enabled, every saved document will be saved into the specified directory. This feature is useful if Administrators want to restrict every User’s access to only one directory, or if Administrators want to keep the documents in one directory.

NOTE: When using the “Restrict saving into the following directory“ option, please make sure that every user who uses IceViewer has write permissions in the specified directory.

0: Allows saving documents into any directory (Default)

1: Restricts the saving documents only into the specified directory

Set_Default_Save_Directory: Sets the directory that appears in the Save As dialog when it is opened. Possible values:

1: The Save As dialog always opens at the directory specified in the “Save_Directory” key.

0: The Save As dialog opens at the directory where the Image has been opened from, or where it was last saved to (Default)

Save_Directory: Specifies the directory, which will be used when the Restrict_Saving option, or the Set_Default_Save_Directory option is enabled. Environment variables can also be used to specify the directory, for example:

<<USERPROFILE>>\Documents

Enable_Tools: By using this option, Administrators can deny access for all standard users on the computer to the features under the Tools ribbon tab. The restriction not applies to users with Administrative privileges.

1: Allows accessing the features under the Tools ribbon tab for standard users. (Default)

0: Denies accessing the features under the Tools ribbon tab for standard users.

Enable_Annotations: By using this option, Administrators can deny access for all standard users on the computer to the features under the Annotations ribbon tab. The restriction not applies to users with Administrative privileges.

1: Allows accessing the features under the Annotations ribbon tab for standard users. (Default)

0: Denies accessing the features under the Annotations ribbon tab for standard users.

Enable_Redact: Enables placing the Redact and Whiteout annotations to the document. This option is disabled if ‘Enable_Annotations‘ is disabled.

0: Disables the Redact and Whiteout annotations.

1: Enables the Redact and Whiteout annotations. (Default)

Enable_Document_Cleanup: By using this option, Administrators can deny access for all standard users on the computer to the features under the Document Cleanup ribbon tab. The restriction not applies to users with Administrative privileges.

1: Allows accessing the features under the Document Cleanup ribbon tab for standard users. (Default)

0: Denies accessing the features under the Document Cleanup ribbon tab for standard users.

Enable_Options: By using this option, Administrators can deny access for all standard users on the computer to the settings under the Options window. The restriction not applies to users with Administrative privileges.

1: Allows accessing the options under the Options window for standard users. (Default)

0: Denies accessing the options under the Options window for standard users.

Magnifying_Scale: Sets the magnification value of the magnifying glass feature. The value is specified in percentages (without the % sign). The default value is 200.

Zoom_Percent: Sets the zoom percentage when viewing a document in Single Page View mode. The value is specified in percentages (without the % sign). The default value is 100.

Default_Copy_Mode: Specifies what should be copied when Ctrl+C is pressed.

1: Copy the selected image area

2: Use OCR on the selected area and copy the text

3: Copy both the image and the OCR text. The other application (where you paste the data) can decide to take the image or the text from the clipboard. (Default)

Quick_Copy_Page_Limit: Configures the amount of disk space IceViewer can temporarily use when copying pages to other IceViewer documents. If the count of the copied pages exceeds this limit, IceViewer compresses the copied pages to use less space, but copying the pages may take longer.

It is also possible to set this value to -1, which disables the limit, and copies every page uncompressed, regardless of the amount of copied pages. This should be faster, and it is the default in IceViewer.

1 or greater: If the count of the copied pages is not more than the provided number, all the pages will be copied using the faster method. Otherwise, all the pages will be copied using the slower method.

0: Copy pages using the slower method, which uses less temporary space, regardless of the page count

-1: Copy pages using the faster method, regardless of the page count (default)

Language_File: IceViewer’s language file location.

IceViewer supports English, French, German and Spanish languages.

If the language file location is missing, the IceViewer will use English language.

Example for French language:

Language_File=[Installed IceViewer]\Languages\French.xml

Default_Cut_Tool_Output_Folder: Sets the default output directory of the Cut File tool.

By default, the current user’s Documents folder is set. For example:

C:\Users\Username\Documents

Default_Split_Tool_Output_Folder: Sets the default output directory of the Split File tool.

By default, the current user’s Documents folder is set. For example:

C:\Users\Username\Documents

Applying_Color_Watermark_To_Monochrome_Image: Determines how IceViewer should behave when a color watermark is applied to a black and white image.

0: Ask the user whether to keep the image black and white or convert it to color when applying a color watermark to a black and white image. (Default option)

1: Keep the image black and white; the watermark will be rendered in black and white.

2: Retain the color of the watermark, and convert the image to color (this results in a larger file size).

Warn_About_Multiple_PDF_Watermarks: Determines whether IceViewer should display a confirmation dialog when adding a new watermark to a PDF that already contains one.

0: Show a confirmation dialog asking "Do you want to replace the current watermark?" when a PDF already has a watermark. (Default option)

1: Do not show the confirmation dialog again, automatically proceed with adding the new watermark and replacing the existing one.

[Watermark_Settings] DO NOT CHANGE IT or edit it. This section stores saved watermark configurations. You may copy the entire entry if needed.

[Watermark_Settings_Ribbon] DO NOT CHANGE IT or edit it. Internally used map for storing watermark preset identifiers.

[Browser_Plugin_Settings]

Enable_SharePoint_Upload: This option controls whether the “Upload to SharePoint” feature on the toolbar is enabled or not in the IceViewer Browser Plug-In.

1: Enable “Upload to SharePoint” feature (default)

0: Disable “Upload to SharePoint” feature

Enable_Send_Email: This option controls whether the “Send Email” and “Email Settings” features on the toolbar are enabled or not in the IceViewer Browser Plug-In.

1: Enable “Send Email” and “Email Settings” features (default)

0: Disable “Send Email” and “Email Settings” features

[Tiff_Default_Compressions]

Use_Original_Compression detects the original compression of the document, and automatically selects the detected compression upon saving if it’s possible, otherwise it uses the defined default compression. (For example, if a color (24bit) image with JPEG compression is converted into monochrome (1bit) image, the IceViewer cannot save the image into JPEG compression.

1: Enables Use original compression. (Default)

0: Disables Use original compression.

Monochrome defines the default compression method for Monochrome (1bit) documents:

201: No compression

202: Pack Bits

203: LZW compression

205: CCITT G3 1D no EOL

206: CCITT G3 1D EOL

207: CCITT G3 2D

208: CCITT G4 (Default)

Greyscale defines the default compression method for grayscale (8bit) documents:

201: No compression

202: Pack Bits

203: LZW compression (Default)

204: LZW Differential compression

Color defines the default compression method for color (24bit) documents:

201: No compression

202: Pack Bits

203: LZW compression (Default)

204: LZW Differential compression

209: JPEG compression

[PDF_Default_Compressions]

Use_Original_Compression detects the original compression of the document, and automatically selects the detected compression upon saving if it’s possible, otherwise it uses the defined default compression. (For example, if a color (24bit) image with JPEG compression is converted into monochrome (1bit) image, the IceViewer cannot save the image into JPEG compression.

1: Enables Use original compression. (Default)

0: Disables Use original compression.

Monochrome defines the default compression method for Monochrome (1bit) documents:

32: No compression

2048: CCIT FAX compression

512: FLAT compression (Default)

Greyscale defines the default compression method for grayscale (8bit) documents.

32: No compression

1024: Run-Length

512: FLAT compression (Default)

Color defines the default compression method for color (24bit) documents:

32: No compression

4096: JPEG compression

512: FLAT compression (Default)

Jpeg_Quality defines the quality of the JPEG compression. [0-100]

[Annotation_Settings]

Annotations_Visible: Shows or hides all annotations.

1: Show annotations (Default)

0: Hide annotations

PDF_To_TIFF_Annotation_Conversion_Mode: Specifies how PDF annotations should be handled when saving PDF files to TIFF files.

0: Convert supported PDF annotations to Black Ice annotations, and burn in unsupported PDF annotations to the page. (Default)

1: Convert supported PDF annotations to Black Ice annotations, and discard unsupported PDF annotations.

2: Burn in all PDF annotations.

3: Discard all PDF annotations.

Default_Stamp: Selects the stamp type for the Default Stamp button on the Home ribbon.

0: Rubber stamp (Default)

1: Stamp from file

2: Personalized stamp

3: Timestamp

Rubber_Stamp: Selects the stamp type for the Rubber Stamp button on the Annotation ribbon.

1: Approved (Default)

2: Assigned

3: Checked

4: Copy

5: Draft

6: Extended

7: Fax

8: Faxed

9: Important

10: Invoice

11: Notice

12: Official

13: On File

14: Paid

15: Passed

16: Pending

17: Processed

18: Received

19: Rejected

20: Release

21: Sent

22: Shipped

23: Top Secret

24: Urgent

25: Void

26: Secret

27: Confidential

28: Client

Timestamp_Show_Date: Shows or hides the date on the Timestamp.

1: Show the date (Default)

0: Hide the date

Timestamp_Date_Format: Sets the date format for the Timestamp.

0: Use default date format from the computer (Default)

1: MM/DD/YYYY (E.g.: 09/30/2017)

2: M/D/YY (E.g.: 9/30/17)

3: YYYY/MM/DD (E.g.: 2017/09/30)

4: DD/MM/YYYY (E.g.: 30/09/2017)

5: DD-MON-YYYY (E.g.: 30-SEP-2017)

6: Julian Date (E.g.: 2458026)

Timestamp_Show_Time: Shows or hides the time on the Timestamp.

1: Show the time (Default)

0: Hide the time

Timestamp_Time_Format: Sets the time format for the Timestamp.

0: 12 hour format (Default)

1: 24 hour format

Timestamp_Show_Minutes: Shows or hides the minutes on the Timestamp. To show the minutes, Timestamp_Show_Time must also be set to 1.

1: Show the minutes (Default)

0: Hide the minutes

Timestamp_Show_Seconds: Shows or hides the seconds on the Timestamp. To show the seconds, Timestamp_Show_Time and Timestamp_Show_Minutes must also be set to 1.

1: Show the seconds (Default)

0: Hide the seconds

Timestamp_Show_Timezone: Shows or hides the time zone on the Timestamp. To show the timezone, Timestamp_Show_Time must also be set to 1.

1: Show the time zone

0: Hide the time zone (Default)

Timestamp_Show_Text: Adds additional text to the Timestamp, specified in the Timestamp_Text key.

1: Show additional text

0: Do not show additional text (Default)

Timestamp_Text: Specifies the text added to the Timestamp if the Timestamp_Show_Text option is enabled.

The value is a single line of text, max 35 characters.

Timestamp_Text_Position: Specifies the position of the additional text on the Timestamp, if the Timestamp_Show_Text option is enabled.

0: Place the text above the date and time. (Default)

1: Place the text below the date and time.

2: Place the text to the left of the date and time.

3: Place the text to the right of the date and time.

Timestamp_Text_Alignment: Specifies the alignment of the additional text relative to the date and time on the Timestamp, if the Timestamp_Show_Text option is enabled. And the text is placed above or below the date and time.

0: Align the text to the left (Default)

1: Align the text to the center

2: Align the text to the right

Timestamp_Burn_To_Every_Page: Specifies which pages the timestamp annotations will appear on, if the annotations are burnt in.

0: Only burn the timestamp annotations to the page where they were placed. (Default)

1: Burn the timestamp annotations to every page of the document.

Rectangle Line Width: The rectangle annotation’s border width.

Possible options:

A number between 1 and 20. (default is 1)

Rectangle Color: The rectangle annotation’s border color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red. (default)

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Rectangle Color RGB: Sets the rectangle annotation’s border color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Rectangle Background Color: The rectangle annotation’s background color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 255)

B: Blue intensity. A value between 0 and 255. (default is 255)

Circle Line Width: Sets the circle annotation’s border width.

Possible options:

A number between 1 and 20. (default is 1)

Circle Color: The circle annotation’s border color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red. (default)

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Circle Color RGB: Sets the circle annotation’s border color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Circle Background Color: Sets the circle annotation’s background color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 255)

B: Blue intensity. A value between 0 and 255. (default is 255)

Rounded Rectangle Line Width: The rounded rectangle annotation’s border width.

Possible options:

A number between 1 and 20. (default is 1)

Rounded Rectangle Color: The rounded rectangle annotation’s border color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red. (default)

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Rounded Rectangle Color RGB: The rounded rectangle annotation’s border color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Rounded Rectangle Background Color: Sets the rounded rectangle annotation’s background color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 255)

B: Blue intensity. A value between 0 and 255. (default is 255)

Block Arrow Line Width: Sets the block arrow annotation’s border width.

Possible options:

A number between 1 and 20. (default is 1)

Block Arrow Color: Sets the block arrow annotation’s border color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red. (default)

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Block Arrow Color RGB: The block arrow annotation’s border color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Block Arrow Background Color: Sets the block arrow annotation’s background color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Line Line Width=<number>

Sets the line annotation’s line width.

Possible options:

A number between 1 and 20. (default is 1)

Line Color: Sets the line annotation’s color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red. (default)

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Line Color RGB: The line annotation’s color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Line Type: Sets the line annotation’s type.

Possible options:

0: Line.

1: Arrow.

2: Filled Arrow.

3: Double Arrow.

4: Double Filled Arrow.

Arrow Line Width: Sets the arrow annotation’s line width.

Possible options:

A number between 1 and 20. (default is 1)

Arrow Color: Sets the arrow annotation’s color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red. (default)

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Arrow Color RGB: Sets the arrow annotation’s color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Pencil Line Width: Sets the arrow annotation’s line width.

Possible options:

A number between 1 and 20. (default is 1)

Pencil Color: Sets the pencil annotation’s color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red. (default)

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Pencil Color RGB: Sets the pencil annotation’s color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Text Color: Sets the text annotation’s color to one of the preset colors.

Possible options:

0: Black. (default)

1: Grey.

2: Blue.

3: Red.

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Text Color RGB: Sets the text annotation’s color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 0)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Comment Color: Sets the comment annotation’s color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red.

4: Purple.

5: Green.

6: Light Blue.

7: Yellow. (default)

8: Light Grey.

9: White.

Comment Color RGB: Sets the comment annotation’s color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 255)

B: Blue intensity. A value between 0 and 255. (default is 0)

Note Text Color: Sets the note annotation’s text color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 0)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Note Background Color: Sets the note annotation’s background color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red.

4: Purple.

5: Green.

6: Light Blue.

7: Yellow. (default)

8: Light Grey.

9: White.

Note Background Color RGB: Sets the note annotation’s background color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 255)

B: Blue intensity. A value between 0 and 255. (default is 0)

Highlight Color: Sets the highlight annotation’s color to one of the preset colors.

Possible options:

0: Black.

1: Grey.

2: Blue.

3: Red.

4: Purple.

5: Green.

6: Light Blue.

7: Yellow. (default)

8: Light Grey.

9: White.

Highlight Color RGB: Sets the highlight annotation’s color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 255)

G: Green intensity. A value between 0 and 255. (default is 255)

B: Blue intensity. A value between 0 and 255. (default is 0)

Highlight Border: Sets the highlight annotation’s border.

Possible options:

0: Not active. (default)

1: Active.

Note: This setting is not considered when a PDF document is opened.

Redact Color: Sets the redact annotation’s color to one of the preset colors.

Possible options:

0: Black. (default)

1: Grey.

2: Blue.

3: Red.

4: Purple.

5: Green.

6: Light Blue.

7: Yellow.

8: Light Grey.

9: White.

Redact Color RGB: Sets the redact annotation’s color to a custom color.

Possible options:

A number based on this formula:

Color = R + G * 256 + B * 256 * 256

Where:

R: Red intensity. A value between 0 and 255. (default is 0)

G: Green intensity. A value between 0 and 255. (default is 0)

B: Blue intensity. A value between 0 and 255. (default is 0)

Redact Border=<0 or 1>

Sets the redact annotation’s border.

Possible options:

0: Not active. (default)

1: Active.

Note: This setting is not considered when a PDF document is opened.

[OCR_Settings]

Open_OCR_Output: Configures the application for opening the OCR output text file.

0: Always open OCR output in Notepad, or the system default text editor (default)

1: Always open OCR output in Microsoft Word (if installed)

2: Always open OCR output in the system default web browser

3: Always open OCR output with the custom application (configure it with the Open_With_Application option)

Open_With_Application=<path>

The absolute path of the custom application to use for opening OCR output text files. Only used if the Open_OCR_Output option is set to 3.

For example: C:\Program Files (x86)\Microsoft Office\Office16\WINWORD.EXE (Opens Microsoft Office Word 2016)

If empty, IceViewer uses the default text editor on the system.

OCR_Language=<Language>

The language of the OCR. By default, the OCR_Language=English.

Output_Directory=<path>

The absolute path of the directory to save the OCR files.

For example: C:\Users\Tester\Desktop

If empty, IceViewer saves the OCR files next to the original document.

Save_OCR_Data=<number>

Specifies where to save the generated OCR data:

0: Do not save the OCR data

1: Save the OCR data to a TIFF tag (default)

2: Save the OCR data to a text file specified in the Output_Directory setting.

Separate_File_Format=<number>

Specifies the output format of the generated OCR data:

0: Save the OCR data as HTML, with position and font data, with .html extension (default)

1: Save the OCR data as Plain Text, with .txt extension

[Printer Settings]

Center Image Vertically=<1 or 0>

Enables or Disables the Center the Image Vertically option on the Print dialog of IceViewer.

Possible options:

1: Option Enabled

0: Option Disabled (Default)

Center Image Horizontally=<1 or 0>

Enables or Disables the Center the Image Horizontally option on the Print dialog of IceViewer.

Possible options:

1: Option Enabled

0: Option Disabled (Default)

Scale Page=<1 or 0>

Enables or Disables the Scale to Fit Page Proportionally option on the Print dialog of IceViewer.

Possible options:

1: Option Enabled (Default)

0: Option Disabled

Use DPI=<1 or 0>

Enables or Disables the Use Image DPI option on the Print dialog of IceViewer.

Possible options:

1: Option Enabled (Default)

0: Option Disabled

Stretch Page=<1 or 0>

Enables or Disables the Stretch to Fit Page option on the Print dialog of IceViewer.

Possible options:

1: Option Enabled

0: Option Disabled (Default)

Print Annotations=<1 or 0>

Enables or Disables the Print annotations option on the Print dialog of IceViewer.

Possible options:

1: Option Enabled (Default)

0: Option Disabled

[Browser Plug-In Viewer Settings]

Force Default Settings: When enabled, the IceViewer Browser Plug-In will ignore the settings in the user’s INI file, and will only use the settings in the default IceViewer INI file located in the IceViewer installation directory.

0: Use the settings from the user-specific INI file first. If the setting is not in the user-specific INI file, use the value from the default INI file. (Default)

1: Ignore the user-specific INI file, only use the default INI file.

Fit Mode=<number>

This option configures the default View Mode of the Browser Plug-In. Possible options:

40015: Actual Size

40044: Fit to Width

40028: Normal Size (Scale to DPI) (Default)

40046: Fit to Window

Zoom Mode=<number>

This option changes between Pan and Zoom mouse modes in the Browser Plug-In. Possible options:

0: Pan Mode – The page can be scrolled by holding down the left mouse button and dragging the page (Default).

1: Zoom Mode – The user can zoom in by clicking on the page or by selecting an area with the left mouse button

Always Show Thumbnails=<number>

This option configures the Show thumbnail for single documents of the Browser Plug-In. Possible options:

0: Disable/Uncheck the "Show thumbnail for single documents" on Browser Plug-In - Option (Default)

1: Enable/Check the "Show thumbnail for single documents" on Browser Plug-In - Option

[Browser Plug-In Printer Settings]

Stretch to page=<1 or 0>

Enables or Disables the Stretched to Fit Page option in IceViewer Browser Plug-In.

Possible options:

1: Option Enabled (Dafault)

0: Option Disabled

Center on page=<1 or 0>

Enables or Disables the Center on Page option in IceViewer Browser Plug-In.

Possible options:

1: Option Enabled

0: Option Disabled (Default)

Print all pages=<1 or 0>

Configures the Default Printing Mode in IceViewer Browser Plug-In.

Possible options:

1: Print all pages. (Default)

0: Print only the current page.

[Scan_Settings]

Scanner: Sets the name of the scanner that will be used for scanning and batch scanning.

Please note, the displayed name of the scanner shown in the Select Scanner dialog might be slightly different from the actual name of the scanner.

To find out the exact name of the scanner, select the scanner in IceViewer, close IceViewer, and check the Scanner key in the

c:\Users\<USERNAME>\AppData\Roaming\Black Ice IceViewer\IceViewer.ini file.

Scanner_Type: The type of scanner that will be used for scanning and batch scanning.

Possible options:

0: TWAIN scanner. (default)

1: WIA scanner.

Remember_Batch_Scan_Directory=<1 or 0>

When this option is 1, the IceViewer will always remember and use the previously used batch scan directory.

1: Remember batch scan directory (Default)

0: Do not remember batch scan directory

Batch_Scan_directory=<<USERPROFILE>>\Documents

This option specifies the default scan directory where the batch scanned documents will be saved. One can use environment variables in the path.

TwainDSM=<1 or 0>

Twain data source manager selection allows users to select which data source manager version must be used for scanning.

Values:

1: Use TwainDSM.dll (Twain 2.0 or later) - Default

0: Use Twain_32.dll (Twain 1.9 or earlier)

Duplex=<1 or 0>

Turns on double sided batch scanning if the scanner supports it.

Values:

1: Scan both sides of the page when batch scanning

0: Only scan one side of the page when batch scanning - Default

Show UI=<1 or 0>

Turns the Scanner Manufacturer’s user interface on or off when batch scanning.

Values:

1: Turn scanner user interface on

0: Turn Scanner user interface off - Default

File Format=<number>

Sets the file format for batch scanning. The following file formats are valid:

1: TIFF file format (.tif) – Default

2: JPEG image (.jpg)

3: Bitmap image (.bmp)

4: Dialogic Fax format (.tif)

5: GammaLink Fax format (.tif)

6: Bicom/NMS Fax format (.tif)

15: PDF file format (.pdf)

16: PNG image (.png)

Multipage=<1 or 0>

When turned on saves all pages into a single file when batch scanning.

Values:

1: Save each page into a single file (only valid for TIFF, and PDF file formats) – Default

0: Save each page into a separate file. In this case the page number will be appended to the file name. E.g.: Document0001.jpg

Append to Opened File=<1 or 0>

When turned on, IceViewer will insert the scanned pages to the end of the currently opened document instead of scanning into a new file. The location of the new pages in the document can be adjusted by either using the Insert Before Selected Page or the Insert After Selected Page options.

Values:

1: Append scanned pages to the opened file

0: Scan to a new file. The new file’s location can be set via the Batch_Scan_Directory option.

Insert Before Selected Page=<1 or 0>

When Append to Opened File and this option are both turned on, IceViewer will insert the scanned pages before the currently selected page in the document. If multiple pages are selected, the new pages will be inserted before the first page of the selection. This option and the Insert After Selected Page option cannot be used at the same time.

Values:

1: Insert newly scanned pages before the selected page in the document.

0: Append newly scanned pages to the end of the document (if Append to Opened File is enabled) – Default

Insert After Selected Page=<1 or 0>

When Append to Opened File and this option are both turned on, IceViewer will insert the scanned pages after the currently selected page in the document. If multiple pages are selected, the new pages will be inserted after the last page of the selection. This option and the Insert Before Selected Page option cannot be used at the same time.

Values:

1: Insert newly scanned pages after the selected page in the document.

0: Append newly scanned pages to the end of the document (if Append to Opened File is enabled) – Default

Compression=<number>

Sets the used TIFF compression for batch scanning.

The following values are valid:

201: No compression

202: Pack Bits

203: LZW compression

204: LZW Differential compression

205: CCIT G3 1D no EOL

206: CCIT G3 1D EOL

207: CCIT G3 2D

208: CCIT G4 - Default

209: JPEG compression

Color Depth=<number>

Sets the color depth for batch scanning.

0: 1 bit Black and White – supported by TIFF (all compressions except LZW differential and JPEG), BMP, PNG, PDF and all Fax formats – Default

1: 8 bit Grayscale – supported by TIFF (No compression, Pack Bits, LZW and LZW differential compression), BMP, PNG, PDF Formats

2: 24 bit Color – supported by TIFF (No compression, Pack Bits, LZW and LZW differential and JPEG compression), BMP, JPEG, PNG, PDF Formats

Number of Pages=<number>

Sets the number of pages when batch scanning. 0 means scan all pages in the feeder. Some scanners do not support setting the number of pages, these scanners might ignore this value. When Duplex scanning is turned on, this number controls the number of images, not the number of sheets.

Default: 0 (Scan all pages in the feeder)

[SharePoint]

Server: Specifies SharePoint server location.

Directory: Specifies the SharePoint directory on the given Server.

User: Specifies the SharePoint user's name.

Authentication Type: Specifies the Authentication Type to be used.

0: Username and Password

1: OAuth v2.0 authentication (default)

HTTPS: Specifies if the connection must use HTTPS.

0: No

1: Yes (default)

Show Properties: Specifies if uploading to SharePoint's server displays the “Document Properties” prompt.

0: No

1: Yes (default)

Log Enabled: Specifies whether SharePoint creates logs of uploads to the server, which help troubleshoot potential issues during the upload process

0: No (default)

1: Yes

Logfile: Specifies the location of the log file.

The default location of the log file is:

c:\ProgramData\Black Ice Software LLC\IceViewer\Logs\BiUploadToSharePoint.log