The BiBatchConverter Service can convert documents with multiple numbers of printers simultaneously.
The number of maximum available printers is limited by the available CPUs on the system and by the purchased license for the BiBatchConverter. BiBatchConverter licenses can be purchased for a specific number of printers.
To increase the maximum number of printers, please perform the following steps:
1. Contact sales@blackice.com with your serial number, to increase the maximum number of printers on the serial number.
2. Once the maximum number of printers is increased, register the BiBatchConverter with the same serial number again.
To register the BiBatchConverter again, go to About > Activate with different serial.
3. Enter the serial number, and press the OK button.
4. Once the registration was successful, go to BiBatchConverter Service Manager > Configuration.
In the dropdown list of the Number of used CPU core(s), the new maximum number of the available printers appears.
For example, if the serial number originally allowed one printer, although the serial number is now increased to allow using 3 printers, in the dropdown list of the Number of used CPU core(s), number 3 appears and can be selected.
Change the Number of used CPU core(s) to the required number. The Number of used CPU core(s) equals the number of used printers for the conversion. For example, if the Number of used CPU core(s) is set to 3, the BiBatchConverter Service will use 3 printers for document conversion.
5. Press OK to save the changes, and press the Start Conversion button to start the service with the specified number of printers.
