Natural Micro Systems

 

Steps (assuming that the board is already inserted in your computer):

 

1. Install CT Access from NMS.

 

2. Install AG Access from NMS.

 

3. Install Natural Fax from NMS.

 

4. Assuming that all three packages were installed in a directory named NMS, go to \NMS\AG\CFG directory. The NMS board needs a configuration file that will contains all the information needed to use the board.( interrupt number, channel settings, etc.). This configuration file is named ag.cfg and can be found in the \NMS\AG\CFG directory. All the other files in this directory are sample configuration files. For more information about the structure and the usage of the ag.cfg file please consult the Access Installation Manual and the AG Runtime Configuration & Developer's Manual, both shipped with the board.

 

5.You will also have to configure your fax licenses. To do this you should create a file named licenses.txt in the \NMS\NFX\ directory. This file should contain only one line, your fax license number. This number is provided by Natural Micro Systems. If you don't have a valid fax license number, you won't be able to send and receive faxes with the board.

 

6. After you created an ag.cfg file you should run the agmon.exe utility which will try to boot your board. If the information in your ag.cfg is correct, everything is set up and the board can be used with Fax/Voice C++. Otherwise you will get an error message and you should correct the information in your ag.cfg file.