Problem with USB Modem on virtual pc

Fax C++/ActiveX related topics

Moderator: Technical Support Team

Problem with USB Modem on virtual pc

Postby es2000 » Wed May 11, 2011 2:34 am

Hello,
We have a virtual computer (VMWare) with operating sistem Windows7 connected to a USROBOTICS modem USB (PN USR805637). Windows detect normally this modem, connected into the virtual port COM2.

Using your demo DSample.exe and inquiring COM2, the demo says "No modems on com port".

The same modem installed into a standard phisical computer can be found by the demo.

Do you knows about problems using USB modems on virtual computers?

Best regards,
Andrea Parmeggiani
Eurosystem2000 s.r.l.
es2000
 
Posts: 16
Joined: Thu Nov 18, 2004 6:21 am

Re: Problem with USB Modem on virtual pc

Postby ladlasheikh » Fri Mar 13, 2015 11:42 pm

standard phisical computer can be found by the demo. ?

___________________
OMAIR
ladlasheikh
 
Posts: 1
Joined: Fri Mar 13, 2015 11:27 pm

Re: Problem with USB Modem on virtual pc

Postby hbgmysite » Thu Mar 26, 2015 11:34 pm

I have found that you can use your USB devices (including modems) in VPC2007 VMs if you enable the Guest OS Integration features. Simply start each VM you wish to use with this feature, click on Tools -> Enable integration features and let it run to install the required software.

Be aware that this also allows access to your other hard disks in the system, not only the .VHD. After the software is installed, you can selectively disable access to specific drives (or any other devices you don't want shared), by going into Tools -> Settings... and clearing the checkboxes for any devices you don't want it to be able to access.
hbgmysite
 
Posts: 1
Joined: Thu Mar 26, 2015 10:36 pm


Return to Fax C++ / ActiveX



Who is online

Users browsing this forum: No registered users and 2 guests

cron